China M51 Bi metal Bandsaw Blade For Hard Metal 54 1 6 Manufacturers Factory Suppliers

German technology, PRODUCTS AND TECHNOLOGY FROM R & D to production are selected German high-level, long service life.Can Be customized production, style is complete, has an independent R & D and

Applicable cutting range: Carbon Steel, structural steel, cast iron, low-alloy steel, aluminum-copper Non-ferrous metal, hard wood. Choose X32 as the backing material, M42 super-hard high-speed steel

Bimetal band saw blade, mainly refers to the tooth tip material for high-speed steel or other high-performance steel, saw blade material is low-alloy spring steel metal cutting band saw blade. The

If a blade has a low number of teeth, then it is considered a coarse blade or rough blade. Coarse blades usually have 2 to 6 TPI (Tooth per Inch). They are good at quickly cutting through soft

Contour Sawing: When sawing irregular shapes and arcs you must consider the minimum radii to be cut. Narrow blades can cut smaller radius; however, they tend to break easily. Go for the widest blade

m51 bi-metal band saw blade

M51 bi-metal band saw blade is made of imported Germany M42/M51 tooth material and backing spring steel material.

Usage and maintenance of band saw blades Tips 1: The band saw blades should be placed in a cool and dry place (to avoid oxidation by moisture) Tips 2: It takes more than two hours to run in the

FUWEISI Bi-metal Band Saw Blade. For our M42/M51 bi-metal band saw blades, we are manufacturing full dimension and TPI, and we only use raw material from Europe, USA and Japan, all our production

Bi-metal strip steel is welded by two materials,imported spring steel as backing strip steel,the high speed steel as adge material.

FUWEISI brand Bi-metal band saw blade is made of imported Germany M42/M51 tooth material and backing spring steel material. HRC of blade could be reached to 67-69.

Bimetal band saw blade is welded by an electron beam under high vacuum to attach a strip of high-speed M42(8% Co) tooth.