China M51 Metal Cutting Tool Manufacturers Factory Suppliers

M51 band saw blade used to cut very hard metal,Special size and TPI can also be produced upon request.

M51 bi-metal band saw blade M51 Tooth+Spring steel back material.HRC can reach 68~69 used for cutting all kinds of material,steel sections,tubes and profiles.

ADVANTAGE . M-51 Edge for brittle and annealed material. For Stainless Steel, rust and acid resistant steel cutting. For medium & large cross section cutting.

ADVANTAGE . M-51 Edge for brittle and annealed material. For Stainless Steel, rust and acid resistant steel cutting. For medium & large cross section cutting.

Feature Bi-metal construction M42 high speed steel cutting edge provides higher heat and wear durability Tooth hardness Rc67-69 5°positive rake for easier penetration and reduced vibration

Package: Size: 13×0.6mm inch 1/2×0.025 For welding loops: 10pcs or 20pcs or 50pcs packed in one box. For coils: 100m or 200m packed in one box or wooden box. Shipping date: If there are requested

Band Saw Blade Problems and Solutions You want to be very careful with your blade selection when cutting metal. I have seen many band saws (and other kinds of saws) ruined because the person

Saw Blade Features: Afforable cost in every cut. Optimized for cutting medium to difficult alloys. Versatile and suitable for cutting single, bundle or nestled material. Fast cutting enforced by M42

Bimetal bandsaw blades(5°positive rake tooth) Bimetal bandsaw blades have high speed steel teeth for a sharper cut and gibe you a longer lasting blade. HSS edge contains 8% cobalt Available in coil

bi-metal band saw blade

NiCr Based Alloys is a group of alloys that are primarily made up of nickel and chromium. These alloys are commonly used in manufacturing cutting blades due to their unique combination of material

Usage and maintenance of band saw blades Tips 1: The band saw blades should be placed in a cool and dry place (to avoid oxidation by moisture) Tips 2: It takes more than two hours to run in the