China Band Saw For Metal Cutting Manufacturers Factory Suppliers

For the Bi-metal saw,the teeth are welded using cobalt-alloy

ADVANTAGE . M-51 Edge for brittle and annealed material. For Stainless Steel, rust and acid resistant steel cutting. For medium & large cross section cutting.

Applicable cutting range: Carbon Steel, structural steel, cast iron, low-alloy steel, aluminum-copper Non-ferrous metal, hard wood. Choose X32 as the backing material, M42 super-hard high-speed steel

Condition of supply& treatment of blades 1. Setting teeth left and right 2. Teeth point hardening 3. Welded in loops/endless 4. Packed in coils(100 meters per coil

Metal cutting saw blade with variable tooth pitch and application

Feature Bi-metal construction M42 high speed steel cutting edge provides higher heat and wear durability Tooth hardness Rc67-69 5°positive rake for easier penetration and reduced vibration

Band Saw Blade Problems and Solutions You want to be very careful with your blade selection when cutting metal. I have seen many band saws (and other kinds of saws) ruined because the person

Bimetal bandsaw blades(5°positive rake tooth) Bimetal bandsaw blades have high speed steel teeth for a sharper cut and gibe you a longer lasting blade. HSS edge contains 8% cobalt Available in coil

For the Bi-metal saw,the teeth are welded using cobalt-alloy with hardness reaching HRC69-70.M51 Tooth Sawtooth is sealed-free, waterproof, oxidation-proof, anti-transportation impact, and each saw

SAFETY RECOMMENDATIONS ON bi metal band saw blade: 1. The machine operator should be conversant with the machine and its correct mode of operation; the operator should be made aware of the dangers of

bi-metal band saw blade

Bi-metal strip steel is welded by two materials,imported spring steel as backing strip steel,the high speed steel as adge material.