M51 Alloy cutting Band Saw Blade

Hangzhou Fuweisi Saw Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of m51 alloy cutting band saw blade in China. With abundant experience, we warmly welcome you to buy high quality m51 alloy cutting band saw blade from our factory. Thank you for your interest in our products.

Contour Sawing: When sawing irregular shapes and arcs you must consider the minimum radii to be cut.

Narrow blades can cut smaller radius; however, they tend to break easily. 

Go for the widest blade that can cut the required profile.

The bi-metal band saw blade is made of high-performance high-speed steel teeth and high-quality spring steel strips through electron beam vacuum welding and special processing.

The M51 Alloy cutting Band Saw Blade teeth have good red hardness and can cut all kinds of ferrous and non-ferrous metals. It is a new type of sawing tool that saves raw materials and reduces energy consumption.

The way the band saw blade is broken in

The new saw blade must be run in before formal use. The service life of an unbroken or unbroken saw blade is 1/3 or less of that of a well-broken saw blade.

1. The feed amount during running-in is 20-30% of the normal feed amount. It is gradually upgraded to normal cutting within 2-4 hours. Each increase in the feed rate and belt speed should not be too large
2. The run-in period is about 5-10% of life expectancy.

Hot Tags: M51 Alloy cutting Band Saw Blade, China, suppliers, manufacturers, factory, Hastelloy Cutting, Tool Steel Cutting Blade, , M51 Cutting Blade, High Speed Steel Cutting, Nimonics Cutting