1. Single jaw metal band saw
1. Scope of application: suitable for sawing long materials and cutting materials with a relatively long length. For example, your material is 6 meters long and you need to cut a section of 0.5 meters or longer. In this case, there is no need to use double pliers Mouthful.
2. Disadvantages: single jaws cannot be sawed, and materials below 15cm may not be able to be cut. The remaining material head is relatively long, which is a waste of material.
3. Advantages: The price of a single jaw band saw is cheaper than a double jaw. If the cutting length is longer, there is no need to waste this cost! ! !
2. Double jaw metal band saw
1. Scope of application: suitable for cutting short materials and materials with a relatively short cutting length. For example, your material is 6 meters long, and you need to cut a section of about 10cm or shorter or even 1-2cm. In this case With a band saw with double jaws, there is almost no material left.
2. Disadvantages: the price of double jaws is higher than that of single jaws, depending on the size of the sawing machine, ranging from 1,000 to 3,000 yuan. The clamping and loosening of the jaws of the band sawing machine should be controlled. It is easy to open the band sawing machine. The guide arm is broken.
3. Advantages: The double-jaw band sawing machine can cut short materials, and can cut any length of size, there is no limit, and there are almost no material heads, which will not cause waste of materials, saving you production costs.
