Why Is The Cutting Surface Of Large Aluminum Profile Cutting Machine Not Smooth?

At present, aluminum processing requirements are getting higher and higher, high-precision aluminum cutting machine has become the first choice of many manufacturers, even if the accuracy of the equipment is very high, the material will inevitably appear in the process of processing some bad cutting phenomenon, such as the phenomenon of this processing section is not smooth should be checked from which aspects?
1. Saw blade: Check the sharpness of the saw blade, whether it is dull, if it is not sharp, sharpen it before use. Saw blade assembly, flange aluminum shavings and foreign objects are cleaned thoroughly.
2. Lubrication: Check whether the lubrication device is spraying oil, whether the spray position is offset, and whether the lubrication amount is enough.
3. Equipment reason: the spindle accuracy is not good, you can dial to measure the spindle accuracy. The flatness of the flange is not good.
4. Whether the belt has slipped, resulting in insufficient equipment speed, caused by