1. Pay attention to the induction training for sawing machine operators, and those with no experience are not allowed to operate the machine tool.
2. Pay attention to the sound of the sawing machine when it is turned on, and tighten the screws everywhere.
3. Be careful not to move the saw blade sharply/fast/suddenly, the sawing should be very slow
4, pay attention to the machine to stop the sawing machine when removing chips and placing the workpiece, and cover the guard when the sawing machine is running.
5. Pay attention to properly adjust the speed, feed and processing range of the sawing machine according to the size, shape and hardness of the workpiece.
6. Note that the saw blade should be loosened when not in use to extend the service life of the saw blade; if it is not used for half a day, the power should be cut off immediately to protect the motor and extend its life.
7. Note that the coolant should be added in an appropriate amount, and it is strictly forbidden to plug the overflow hole, otherwise the water pump will burn out. When using a new saw blade, run in at a low speed and feed rate.
8. Note that the power of the sawing machine should be turned off before debugging. The saw blade must be replaced by an experienced person.
9. Note that the on-site caliper/micrometer must be in the box, the items should be neatly arranged, and they should be returned immediately after use.
10. Pay attention to the on-site small material head/big material immediately put it into the specified area, and it is not allowed to throw it into the garbage can.
