First of all, the cutting machine equipment in the normal operation of the cutting sound is a more normal phenomenon, and if the cutting sound is too large, there are other chain reactions, then we have to check the structure of all aspects of the equipment, to find the cause of the sound is too loud.
Secondly, if the end face cut out by the aluminum cutting machine equipment in the cutting process is particularly not smooth, and when the knife is returned, there is an obvious phenomenon of sweeping the knife, the material is heated seriously and a series of phenomena, which will directly lead to a particularly loud noise in the cutting process.
First, we must first check whether the saw blade time has been used for too long, there has been wear phenomenon, need to be replaced or milled.
Second, whether the lubrication effect is not in place. If the aluminum cutting machine does not use a lubricating device to lubricate the saw blade, the good saw blade will not cut for a few hours, there will be serious wear, resulting in noise.
Third, about the aluminum cutting machine itself, first of all, we have to check whether the spindle accuracy of this equipment meets the qualified standard, if the spindle runout is too large, it will also lead to the saw blade bias over, there is an increase in noise phenomenon
