First, automatic feeding
Aluminum cutting machine feed refers to the combination of 6 meters or 8 meters long aluminum parts (workpieces) and aluminum cutting equipment, and aluminum parts are connected to the equipment. There are a lot of aluminum cutting equipment that can't do this, usually just making a support rack where the entire aluminum part sits on the shelf, but this can also greatly facilitate the worker's material. Some manufacturers have also developed automatic feeding devices, which automatically feed the aluminum into the aluminum cutting machine when the front aluminum part is cut.
Second, clamp (fix) the workpiece
It refers to the process of fixing aluminum in the cutting process of the aluminum cutting machine. The fastness of fixing directly affects the cutting accuracy and the service life of the tool (saw blade). At present, our commonly used fixing methods include manual fixing, automatic hydraulic clamping, pneumatic clamping and so on.
Third, the feeding process
When the aluminum is fed, each part is fed. Of course, hand feeding is done by hand. Automatic feeding methods include motor, pneumatic and hydraulic modes, combined with roller or lead screw feed.
Four, cut off automation
This is a necessary element for aluminum cutting machines. Of course, it can't be said that the automatic aluminum cutting machine. The feeding process is a process that is gradually carried out with the deepening of the aluminum cut and the cutting tool. The existing mechanical feed is driven by gear, pneumatic feed, hydraulic feed, etc.
Five, cutting workpiece automatic counting function
That is to say, how many parts of the aluminum cutting machine is reflected, and now the PLC control system has an automatic counter function.
