Problems that often occur when using saw blades
Problem: The cut material is skewed, different lengths, uneven cutting surfaces, burrs, deformation of the saw blade, broken teeth, saw blades, cracks, short life
Reason: (Many situations are caused by not paying attention to details)
Material: Sometimes the problem lies in the cut material. Because there are too many impurities in the purchased material, when the saw blade touches these impurities, the super-hard saw blade may crack or make a loud noise. The cut surface It will be uneven. The softer HSS saw blade will not break, but the cutting result will be skewed because the saw blade will turn when it contacts the particles.
Saw blade: The saw blade is not properly set and deformed under pressure, the saw teeth are blunt and not worn, the deflection is poor, the number of teeth is not properly selected, the strength of the saw blade is incorrect, the wrong saw blade is selected, and the quality of the saw blade is poor.
Cutting machine: The state of the jig, the saw blade is loaded with the incorrect number of revolutions, the cutting speed is not correct, and the error factors of the saw blade and the cutting machine will affect each other.
