As the saying goes: "The man depends on the clothes and the horse depends on the saddle", in this era of looking at the face, beautiful appearance can often make people get a lot of points. And in a large number of industrial products, and has not been affected by the trend of The Times?
For industrial equipment or industrial products, many people's impression of it is often not good. Among them, "simple" and "five big three rough" are synonymous with many industrial equipment.
But such conventional wisdom has changed dramatically. More and more enterprises begin to pay attention to the "image" of their products.
Among them, for a large number of aluminum profile processing enterprises, although the various types of product structure looks very simple, whether the sawing section is smooth is the key to whether the appearance of each type of aluminum profile is "beautiful".
In the age of appearance level, even our aluminum products can not escape the impact. From the standpoint of the buyer, when they introduce various types of aluminum products, the first thing they see is whether the surface finish of the profile sawing is up to standard.
Once the buyer finds that the cross section of the aluminum product is full of burrs and is not smooth at all, it is bound to cause the buyer to worry about the quality of the product, and it is impossible to reach a deal.
Starting from the sawing process of various types of aluminum profiles, in order to reach the standard of the cross-section finish of the aluminum profiles sawing out by ourselves, we need to start from the causes and find ways to take targeted measures.
What are the reasons why the finish of the sawn section of aluminum profiles is not up to standard?
Cause one: Device factor
As an aluminum cutting machine fighting in the aluminum profile sawing processing line, the equipment factor we have to mention. Because of the quality of the aluminum cutting machine itself, the precision of the sawing processing will directly determine the finish of the cross-section when sawing the profile.
Starting from the factors of the equipment, the reason why the finish of the section saw is not up to the standard is mainly due to the spindle accuracy of the aluminum cutting machine.
In general, if the spindle accuracy of the aluminum cutting machine is not high, only 0.1mm, then it is impossible to meet the requirements of precision sawing. At the same time, after the aluminum cutting machine is used for a long time, the deviation and displacement of the feed guide rail is also the reason why the sawing section light is not up to standard.
Cause two: human operation factors
"Chollima is often and Bole is not often", for aluminum profile sawing processing enterprises, when they get an excellent aluminum cutting machine, whether they can use it well, whether they can process aluminum products needed by the market, it is six points by people, four by the machine.
Therefore, due to improper human operation and resulting in the profile sawing section finish is not up to standard, repeated burrs are often common.
The reason is mainly to operate the workers' POTS. For example, when sawing and processing some thin and soft aluminum profiles, if the pressure of the press device can not be reduced according to the characteristics of the profiles, it is impossible to process a product with a finish standard and no burrs.
Cause three: Saw blade factor
Saw blade and aluminum cutting equipment, aluminum profile sawing processing indispensable two "magic weapon", any problem will affect the quality of the final product.
Among them, when we have an excellent performance of aluminum cutting machine, the performance of the saw blade will directly affect the finish of the section sawing.
From the point of view of the saw blade, once the saw blade in the process of use, there is a bias, then it is bound to cause the sawing section of the profile of the problem of finish is not up to standard.
In this regard, if we want to root out the problem of substandard product finish caused by the saw blade problem, choosing a good saw blade is the key to solving such problems. Ensuring that your blade is supplied directly from the saw blade manufacturer is the key to the key.
Reason four: Cooling factor
As we all know, when the saw blade is in contact with the profile, the serrations are often the most serious place for heating. Once the heat accumulated on the sawtooth can not be discharged by effective means, it will inevitably affect the finish of the sawing section of the profile.
Among them, because the heat is not exported in time after the saw blade is heated, the light will often cause the tooth to wear, which indirectly affects the sawing effect of the profile.
Heavy may cause the saw blade need to be scrapped as a whole, as for the protection of cutting performance, there is no way to talk about. In the actual processing, in order to ensure the finish of the sawing section of the profile, the solution of micro-lubrication is often used
The heat accumulated on the saw blade can be effectively taken away by spraying the aluminum cutting fluid onto the profile in a misting manner within 1 second. Thus, it ensures that the saw blade will not have the problem of deflection and wear due to heat when sawing profiles.
For the sawing processing of various types of aluminum profiles, the pursuit of no burrs and complete finish standards is a matter that a large number of aluminum cutting machine R & D and manufacturing enterprises are committed to pursuing and practicing.
As the user of the aluminum cutting machine, in order to strictly control the quality of the profile sawing, there is no problem that the sawing section finish is not up to standard, in addition to the standard operation, the selection of the supplier of the aluminum cutting machine can help us save a lot of time.
