At present, in the era of rapid industrial development, many enterprises are useful to aluminum cutting machine, which is commonly known as the automatic aluminum cutting machine. For example, solar photovoltaic door and window frame, all female home, aluminum aluminum profiles, aluminum rods will be used, since there are so many industries will use aluminum cutting machine equipment, then naturally this equipment will appear some common failures, Kunshan Dengshi Precision Machinery focused on the production of automatic, high-efficiency aluminum cutting machine, but also comprehensive accumulated a lot of experience, Many customers will reflect to our company how to eliminate some situations that often occur in the sawing machine, so that customers can resume production as soon as possible. Here I will give you a simple list of a few common faults and troubleshooting methods.
First, the aluminum profile cutting machine does not advance after starting
This is mostly due to the limit cylinder went to the limit position, touched the limit switch, resulting in sawing not forward; There is also a possibility that the sawing propulsion cylinder, or the propulsion stepper motor equipment components themselves are damaged and need to be replaced.
Second, the aluminum profile cutting machine presses, but the cylinder does not press
This is also the pressure cylinder that many users often reflect, do not press this may be the sawing adjustment valve in place, his air pressure is closed, so the cylinder does not press, this through the cylinder adjustment valve to adjust the cylinder pressure speed.
Third, sawing produces burrs, sawing perpendicularity is not good
There are many reasons for the bad verticality of sawing, and the specific situation has to be treated specifically, usually sawing has burr, may be due to the saw blade lubrication is not in place, or the lubrication method is wrong, the other point is that the saw blade is used for too long, the saw blade passivation. In this case, it is necessary to sharpen the saw blade in time, if the lubrication is not in place, then find out whether the lubricating oil injection point is aligned with the cutting edge of the saw blade.
