Metal Cutting Band Saw Blade 34

Hangzhou Fuweisi Saw Industry Co., Ltd. is one of the most reliable manufacturers and suppliers of metal cutting band saw blade 34 in China. With abundant experience, we warmly welcome you to buy high quality metal cutting band saw blade 34 from our factory. Thank you for your interest in our products.

Bi-metal high quality high precision M42 double metal band saw blade-suitable for pipe, Angle Steel, channel steel.

Bimetal band saw blades with a manual feed vertical saw with a universal band features: constant tooth pitch, suitable for difficult-to-process materials and special alloys.

The new saw blade must be run-in before being used. The service life of a non-running-in or non-running-in saw blade is 1/3 or less of that of a running-in saw blade. 1. The feed rate during running-in is 20-30% of the normal feed rate. Gradually ascend to normal cutting within 2-4 hours. Each increase in feed and belt speed are not too large 2.5% . Run-in period is about 5-10% of the life expectancy.

Question: The cutting speed is too slow.
Solution: Check if the saw blade is sharp enough and make necessary grinding or replacement. Ensure proper sawing parameters such as feed rate and cutting depth.

Question: The saw blade gets stuck during cutting.
Solution: Check for proper lubrication and ensure the material being cut is clean and free from debris. Adjust the cutting parameters if needed.

Question: The cut surface is not smooth.
Solution: Check the saw blade for damage or dullness and replace or sharpen it. Ensure the sawing machine is in good condition.

Question: The saw blade breaks easily.
Solution: Check for excessive tension or misalignment and make adjustments. Make sure the saw blade is of good quality and suitable for the material being cut.

Question: The cutting accuracy is not good.
Solution: Check the sawing machine for proper alignment and make necessary adjustments. Ensure the material is fixed properly before sawing.

Question: The saw blade vibrates excessively.
Solution: Check if the sawing machine is properly balanced and mounted. Check for loose components and tighten them.

Question: The saw blade makes loud noise during cutting.
Solution: Check for proper lubrication and ensure the saw blade is running smoothly. Check for any obstructions or debris on the sawing machine.

Question: The cutting line is not straight.
Solution: Check the material for proper alignment and make adjustments. Ensure the saw blade is straight and not bent.

Question: The saw blade wears out quickly.
Solution: Check the cutting parameters and make necessary adjustments. Use proper cutting techniques and avoid excessive force.

Hot Tags: metal cutting band saw blade 34, China, suppliers, manufacturers, factory